Plywood 9 mm
Light and strong panel of poplar wood veneer with white top coat
Plywood 9 mm
Light and strong panel of poplar wood veneer with white top coatKies je voor een levertijd van één dag en bestel je tussen 16:30 en 21:30 uur, dan kun je alleen kiezen voor bezorgdienst ONB of afhalen bij één van de afhaalpunten.
Fast delivery: many products ordered today, delivered tomorrow
High print quality: on our high-tech printers from Durst & HP
Large assortment: 400+ products and materials, 450+ accessories
Best service: questions about this product? We are happy to help you!
Positives and negatives
Multiplex® Printing
Multiplex has a flat white top layer and can be printed on one side. The print retains the characteristic and natural appearance, allowing the color and wood features to remain visible through the image.
This 9 mm thick wood weighs 3.7 kg per m² and is composed of multiple layers of poplar wood veneer, resulting in a beautifully homogeneous whole. Multiplex has no seams, and you can order it in one piece up to 246 cm wide and 117 cm high.
Not Flame Retardant and Not Weatherproof
The material is not flame retardant, making it unsuitable for public spaces. Additionally, it is not weatherproof and should only be used outdoors temporarily.
Common Applications
As mentioned, this material can be used both indoors and temporarily outdoors. Multiplex is often used for panels, photo prints on wood, wall circles, hexagons, and room dividers.
PEFC Certification
The international PEFC certification signifies environmental friendliness. It guarantees that the products come from sustainably managed forests and contribute to forest preservation.
Assembly Tips
Multiplex is a relatively soft material that is easy to screw. You don’t need pre-drilled holes. The material is lightweight and straightforward to assemble.
Downloads
Log in to view downloads.FAQ
In what thicknesses is plywood available?
This material is available with a thickness of 9 mm.
Can plywood start to expand?
Yes, with changing (weather) conditions, the material can shrink and expand. This can be several millimeters. Therefore, make drill holes slightly wider. This will give the material more room to expand and prevent the material from bulging.
Is plywood also available without a white topcoat?
Yes, we offer two variants. You can choose an untreated variant with wood appearance or a plywood panel with a white top layer.
What printing technique do you use for this material?
The UV printing technique! Here the ink is hardened by a UV lamp. The ink is scratch-resistant and gives a beautiful finish. Good to know: the print is not odor-free, this goes away after a while.